- \n
- Turn on the power switch.<\/li>\n
- Check whether the air pressure is sufficient (must reach\u00a00.6Mpa).<\/li>\n
- Click the host to start, and check whether each action is working properly.<\/li>\n
- Check and clean up each box room.<\/li>\n
- Put the bag, load the material, put the material box.<\/li>\n
- Click the host to start.<\/li>\n
- The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is\u00a0tight\u00a0and through the water check(Must check\u00a0vacuum chamber\u00a01-10).<\/li>\n
- During the\u00a0production process, check the product sealing and pumping conditions continuously.<\/li>\n
- Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean.<\/li>\n
- The\u00a0bag or material dropped on the machine,\u00a0should be hooked out\u00a0with a\u00a0hook,\u00a0do not take it by hand.<\/li>\n
- The\u00a0relevant\u00a0\u201cparameter settingsnbsp;on the display screen\u00a0shall not be changed without permission.<\/li>\n
- When the\u00a0machine is running abnormally, report it to the monitor or maintenance personnel in time, and\u00a0do not continue to operate.<\/li>\n
- Turn off the power after the work is over,\u00a0disassemble the material tray and measuring cup for cleaning and disinfection.<\/li>\n<\/ul>\n
![\"operation\"](\"https:\/\/echomachinery.com\/assets\/OIL-SUPPLY-SYSTEM3.BCveDD2u_wAwiz.webp\")
<\/figure>\nFeeding personnel<\/strong><\/h2>\n
The main responsibilities of the feeding personnel are as follows:<\/p>\n
- \n
- Sterilize the elevator, material tray and measuring cup with alcohol.<\/li>\n
- Put in materials according to regulations;<\/li>\n
- Staff needs to complete the packaging of the existing materials on the machine, pull the remaining materials back to the cold storage, and clean up the remaining debris on the machine, then they can rest.<\/li>\n
- When the delivery of materials is abnormal, press the emergency switch in time, do not continue, and report to the monitor or maintenance personnel in time.<\/li>\n
- During the feeding process, if any material falls, needs to be stopped and taken, do not take it while the machine is running.<\/li>\n
- Do not feed or take material above the poke cylinder.<\/li>\n
- Clean and disinfect the machine after work.<\/li>\n<\/ul>\n
All operators must abide by the above operating procedures to ensure safety.<\/p>\n
Correct operation mode will maximize the value of the equipment, but also can extend the service life of the equipment to the greatest extent, to ensure the quality of the equipment, so the equipment should be used in accordance with the operation process.<\/p>\n
Other<\/h2>\n
This guide applies to our premade pouch packaging machines<\/a> and automatic vacuum packaging machines<\/a>.<\/p>\n
In order to better let customers understand the subsequent maintenance and repair of the equipment, we also briefly listed the related matters that maintenance personnel should pay attention to in the article Packaging Machine Maintenance Guide<\/a>.<\/p>\n